EasyManua.ls Logo

Craftsman 316.350850 - User Manual

Craftsman 316.350850
54 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TABLE OF CONTENTS
Warranty Page 2
Safety Rules Pages 3 - 8
Oil and Fuel Information Page 9
Starting/Stopping Instructions Pages 10-12
Operation Pages 13 - 14
ONE YEAR LIMITED WARRANTY ON CRAFTSMAN GAS CHAIN SAW
For one year from the date of purchase, when this Chain Saw is used and maintained according to the
operator’s manual, Sears will repair any defect in material or workmanship free of charge.
This warranty excludes the bar, chain, spark plug and air filter, which are expendable parts that can
wear out from normal use in less than one year.
If this Chain Saw is used for commercial or rental purposes, this warranty applies for only 30 days
from the date of purchase.
WARRANTY SERVICE IS AVAILABLE BY RETURNING THIS CHAIN SAW TO THE NEAREST
SEARS STORE OR SEARS PARTS & SERVICE CENTER IN THE UNITED STATES.
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
Maintenance and Repair Pages 15 - 21
Troubleshooting Page 22
Specifications Page 23
Repair Parts Page 24
Spanish Pages 27 - 52
WARRANTY STATEMENT
2
SPARK ARRESTOR NOTE
NOTE: For users on U.S. Forest Land and in the
states of Califor
nia, Maine, Or
egon and W
ashington.
All U.S. Forest Land and the state of California (Public
Resources Codes 4442 and 4443), Oregon and
Washington require, by law that certain internal combus-
tion engines operated on forest brush and/or grass-cov-
ered areas be equipped with a spark arrestor, main-
tained in ef
fective working or
der, or the engine be con-
structed, equipped and maintained for the prevention of
fire. Check with your state or local authorities for regula-
tions per
taining to these r
equir
ements. Failur
e to follow
these requirements could subject you to liability or a
fine.
This unit is factory equipped with a spark
arrestor. If it requires replacement, ask a Sears or other
qualified service dealer to install the Spark Arrestor Kit.
WARNING
THE ENGINE EXHAUST FROM THIS
PRODUCT CONTAINS CHEMICALS
KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE CANCER, BIRTH DEFECTS
OR OTHER REPRODUCTIVE HARM.
CALIFORNIA PROPOSITION 65 WARNING
Operator’s Manual
55cc 2-Cycle
GASOLINE CHAIN SAW
Model No. 316.350850
with
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• PARTS LIST
CAUTION: Before using this
product, read this manual and
follow all safety rules and oper-
ating instructions.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A.
Visit our website: www.sears.com/craftsman
9096-31B206(2) date(08/06)

Table of Contents

Questions and Answers

  • V
    Valerie Hicks MDJul 29, 2025
    Why won't my Craftsman Chainsaw start?
    • M
      maryharmonJul 29, 2025
      Your Craftsman Chainsaw might not start due to several reasons: incorrect starting procedures (refer to the Starting/Stopping section for guidance), a fouled spark plug (clean/gap or replace it), an empty fuel tank (fill it with properly mixed fuel), or the primer bulb not being pressed enough (press it fully and slowly 10 times). It may also be caused by an incorrect carburetor mixture adjustment setting, in which case you should have it adjusted by a qualified service dealer.
  • D
    Debbie ThorntonAug 3, 2025
    How to fix a Craftsman 316.350850 Chainsaw with no power under load?
    • B
      bandersonAug 3, 2025
      If your Craftsman Chainsaw has no power under load, the issue could stem from several factors. Start by checking the carburetor mixture adjustment setting; if it's incorrect, have it adjusted by a qualified service dealer. Also, consider whether you're using old or improperly mixed fuel (drain the gas tank and add a fresh fuel mixture). A plugged air filter (replace or clean the air filter) or a fouled spark plug (replace or clean the spark plug) might also be responsible.
  • C
    Christine CaldwellAug 8, 2025
    What to do if my Craftsman 316.350850 Chainsaw starts but has low power?
    • N
      normanmarisaAug 8, 2025
      If your Craftsman Chainsaw starts but the engine has low power, there are several possible causes. The fuel filter may be plugged (replace the fuel filter). Ensure the lever is in Position 3. A dirty spark arrestor screen (replace the spark arrestor screen) or a dirty air filter (remove, clean, and reinstall the filter) could also be the cause. If these steps don't resolve the issue, the carburetor mixture adjustment setting may be incorrect, requiring adjustment by a qualified service dealer.
  • S
    Susan NielsenAug 13, 2025
    Why does my Craftsman Chainsaw engine hesitate?
    • K
      Karen PerezAug 14, 2025
      If your Craftsman Chainsaw engine hesitates, it might be due to an incorrect carburetor mixture adjustment setting, which should be adjusted by a qualified service dealer. Another potential cause is a plugged air filter (replace or clean it). Also, check your fuel; old or improperly mixed fuel can cause hesitation (drain the gas tank and add a fresh fuel mixture).
  • J
    Jasmine MayAug 18, 2025
    What causes a Craftsman 316.350850 to run erratically?
    • C
      castilloaprilAug 18, 2025
      An erratic running Craftsman Chainsaw can be caused by several things. The spark plug may be incorrectly gapped (clean/gap or replace the plug). A plugged spark arrestor (clean or replace spark arrestor) or a dirty air filter (clean or replace air filter) could also be the culprit.
  • A
    Abigail HammondAug 23, 2025
    Why is my Craftsman 316.350850 smoking excessively?
    • G
      Glenn RhodesAug 23, 2025
      Excessive smoke from your Craftsman Chainsaw can be due to an incorrect carburetor mixture adjustment setting, which requires adjustment by a qualified service dealer. It may also be caused by an incorrect fuel mixture; ensure you are using properly mixed fuel (40:1 mixture).

Summary

Rules for Safe Operation

Important Safety Instructions

General guidelines for safe operation of the chainsaw.

Operate Your Saw Safely

Key safety precautions to follow during chainsaw operation.

Handle Fuel with Caution

Kickback Safety Precautions

Measures to prevent or mitigate kickback injuries when operating the chainsaw.

Fuel Safety

Know Your Saw

Safety Features

Kickback Specifics

Warning: Kickback Dangers

Explains the dangers of kickback and potential for serious injury.

Rotational Kickback Explained

Describes rotational kickback and its causes.

Pinch Kickback Explained

Details pinch kickback and its effects on the operator.

Oil and Fuel Information

Oil and Fuel Mixing Instructions

Guides on how to mix oil and fuel for the chainsaw.

Starting and Stopping Instructions

Before Starting Engine

Essential checks and information before starting the chainsaw engine.

Guide Bar and Chain Oil

Explains the importance of bar and chain lubrication and how to fill the oil tank.

Fueling the Engine

Stopping Instructions

Starting a Cold Engine

Detailed procedure for starting a cold chainsaw engine.

Starting a Warm Engine

Chain Brake Test

Chain Lubrication and Automatic Oiler

Operating Instructions

Felling a Tree

Instructions on how to safely cut down a tree.

Maintenance and Repair Instructions

Saw Chain Tension Adjustment

Chain Brake Mechanical Test

Guide Bar and Chain Maintenance

Chain Maintenance and Lubrication

Troubleshooting

Unit Wont Start or Run

Common causes and solutions for starting or running issues.

Engine Has Low Power or Hesitates

Troubleshooting steps for reduced engine power or hesitation.

Engine Runs Erratic or Smokes Excessively

Diagnosing and fixing erratic running and excessive smoking.

Craftsman 316.350850 Specifications

General IconGeneral
Engine Type2-cycle
Bar Length18 inches
Weight13.2 lbs (without bar and chain)
TypeGas Chainsaw
Engine Displacement42cc
Power SourceGasoline
Chain Pitch0.325 inches
Chain Gauge0.050 inches

Related product manuals