Need help?Do you have a question about the Craftsman 351.233731 and is the answer not in the manual?
General| Type | Benchtop Planer |
|---|---|
| Power Source | Electric |
| Blade Quantity | 3 |
| Maximum Cutting Width | 13 inches |
| Maximum Cutting Depth | 1/8 inch |
| Feed Rate | 26 feet per minute |
| Motor | 15 Amp |
| Cutterhead Speed | 10, 000 RPM |
| Maximum Depth of Cut | 1/8 inch |
| Maximum Width of Cut | 13 inches |
| Dust Port Size | 2-1/2 inches |
Essential safety preparations for the operator before starting work.
Procedures for maintaining the tool to ensure safe and efficient operation.
Emphasizes the importance of understanding tool operation and limitations.
Key safety rules and procedures for adjusting the planer's cutting depth.
Solutions for snipe, fuzzy, torn, and rough raised grain.
Addresses uneven depth cuts and scale inaccuracies.
To Next Page