To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 351.217580 and is the answer not in the manual?
Read all safety rules and precautions before operating the tool.
Connect planer to approved power source. Motor operates on specified voltage and frequency.
Ensure proper grounding to protect against electrical shock. Use 3-prong plug and receptacle.
Read all safety instructions before operating. Wear eye protection.
Explains the ON/OFF switch, switch lock, circuit breaker, and depth of cut adjustment.
Proper technique for feeding lumber, avoiding kickbacks, and receiving planed wood.
Step-by-step guide to safely remove and replace planer blades.
Procedure to restore parallelism of rollercase with base to ensure even cuts.
Explains causes and corrective actions for gouging at ends of board.
Explains causes and corrective actions for uneven depth of cut (side to side).
Explains causes and corrective actions when planer does not operate.
Detailed list of part numbers, descriptions, and quantities for the base.
Detailed list of part numbers, descriptions, and quantities for the rollercase.
General