Need help?Do you have a question about the Craftsman 351.217240 and is the answer not in the manual?
General| Type | Benchtop Planer |
|---|---|
| Power Source | Corded Electric |
| Blade Quantity | 2 |
| Motor | Induction |
| Maximum Depth of Cut | 1/8 inch |
| Dust Port Size | 2.5 inches |
| Maximum Cutting Width | 12 inches |
Details the one-year warranty coverage for the jointer/planer.
Proper apparel and alertness for safe operation.
Safety aspects of tool maintenance and checks.
Essential knowledge for safe tool operation.
Attaching trunnions to the rear of the fence.
Attaching the fence assembly to the jointer bed assembly.
Proper grounding procedures to prevent electrical shock.
Guidelines for selecting and using extension cords safely.
Details the motor's horsepower and electrical specifications.
Wiring schematic and connection details for the motor.
Specific safety guidelines to follow during tool operation.
How to adjust the depth of cut using the handwheel.
Procedure to measure the current depth of cut.
Adjusting the fence for various angles and stability.
Ensuring the blade guard is in place and functions properly.
Procedure to check and adjust blade height for accurate cuts.
Precautions to protect blades from damage and ensure safe use.
How to operate the switch and use the key lock feature.
Techniques for feeding wood into the jointer/planer.
Techniques for guiding and feeding workpiece with or against grain.
When and how to use push blocks for safety and control.
Adjusting the fence for angled cuts and chamfering.
Attaching and using a dust collection system.
How to determine if blades are worn or dull.
Procedure for honing or sharpening the jointer/planer blades.
Step-by-step guide for replacing the blades.
How to adjust or replace the blade guard for safety.
Procedure for removing and replacing the timing belt.
Guidelines for lubricating the tool's moving parts.
Instructions for cleaning and protecting machined surfaces.
Routine maintenance to keep the unit in good operating condition.
Diagram showing the location of all replacement parts.
Table listing part numbers, descriptions, and quantities.
To Next Page