To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 351.217890 and is the answer not in the manual?
Wear proper apparel, protective hair covering, safety shoes, and safety glasses. Avoid loose clothing.
Maintain a clean, well-lit area, avoid damp locations, use proper electrical connections, and keep others away.
Connect to power source only after assembly. Ensure correct voltage and frequency for safe operation.
Ensure proper grounding to prevent electrical shock. Use a grounded 3-prong receptacle or qualified electrician.
Follow general safety rules, ensure guards are attached, keep hands clear, wear eye protection, and let tool reach speed.
Feed workpiece at a continuous, even rate, holding it firmly down and against the fence, keeping fingers close.
Hone blades individually with a fine sharpening stone, ensuring the stone is flat and moved correctly.
Unplug tool, block guard, loosen clamp screws, remove blade and clamp, clean, install new blade and clamp.
Check switch, motor, line voltage, circuit load, fuses, and wiring for potential causes of motor failure.
General