To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 351.217880 and is the answer not in the manual?
Details the terms and duration of the manufacturer's warranty for product defects.
Essential personal safety precautions for the operator before starting work.
Guidelines for setting up a safe and efficient work environment.
Emphasizes understanding tool operation and the importance of maintenance for safety.
Proper techniques for handling workpieces and using recommended accessories.
Step-by-step guide for attaching the support structure to the jointer.
Instructions for mounting the fence and its bracket onto the jointer.
Details for installing dust chutes and collection systems.
Important warnings and guidelines regarding the tool's power supply.
Critical information on proper electrical grounding for safety.
Information on extension cord length and motor specifications.
Diagram illustrating the tool's internal electrical wiring connections.
Overview of features, capabilities, and operational safety rules.
Explanation of how to adjust and measure the depth of cut.
Instructions for positioning the fence and checking the blade guard.
Steps for adjusting the blade height for proper operation.
Guidance on feeding workpieces, using push blocks, and avoiding blade damage.
Guidance on beveling, chamfering, and dust collection system usage.
Inspecting, sharpening, and replacing the jointer/planer blades.
Procedures for replacing drive belts, fan belts, and brushes.
Tips for keeping surfaces clean, lubricated, and the tool in good condition.
Addresses issues like no start, stalling, overheating, or slow speed.
Solutions for fuse issues, snipe, uneven cuts, inaccurate angles, and grain defects.
General