Need help?Do you have a question about the Craftsman 351.275210 and is the answer not in the manual?
Ensure proper attire, alertness, and avoid distractions before starting work.
Maintain a clean, well-lit, and safe work environment, free from hazards.
Regular checks, cleaning, and lubrication are essential for safe operation.
Understand the tool's capabilities, limitations, and proper operating procedures.
Step-by-step guide to attaching the handwheel and handle to the machine.
Instructions for removing protective caps before operation.
Guidance on securely mounting the planer to a stable workbench or table.
Ensuring proper connection to a grounded 3-prong receptacle for shock protection.
Guidelines for using temporary adapters and ensuring a secure ground connection.
Features and capabilities of the 12½" planer/molder.
Essential safety precautions to follow during tool operation.
Guidance on setting and managing the depth of cut for effective planing.
Techniques to prevent gouging at the ends of boards during planing.
Understanding molding and preparing workpiece for superior finish.
Instructions for mounting and using the optional dust collector chip chute.
How to reset the motor overload protection circuit breaker.
Using lifting bars for safe and easy relocation of the planer/molder.
Guidelines for cleaning and lubricating moving parts for longevity.
Common causes and corrective actions for snipe in planing.
Addressing issues causing fuzzy or torn grain during operation.
Troubleshooting steps for table movement issues.
Diagnosing and resolving power, overload, or switch related operational failures.
Identifying causes when the board feeds but no material is removed.
Solutions for removing knives when gibs are not properly loosened.
To Next Page
General