andseekmedicalattention.Ananti-vi-
brationsystemdoesnotguaranteethe
avoidanceoftheseproblems.Users
whooperatepowertoolsonacontinual
andregularbasismustmonitorclosely
theirphysicalconditionandthecondition
ofthistool.
CHAINBRAKE:Tocomplywith
FederalOSHARegulationsforCom-
mercialLogging,achainbrakeis
requiredandshallnotberemoved
orotherwisedisabled.
SPARKARRESTINGSCREEN:Your
sawisequippedwithatemperature
limitingmufflerandsparkarresting
screenwhichmeetstherequirements
ofCaliforniaCodes4442and4443.
AllU.S.forestlandandthestatesof
California,Idaho,Maine,Minnesota,
NewJersey,Oregon,andWashington
requirebylawthatmanyinternalcom-
bustionenginestobeequippedwitha
sparkarrestingscreen.Ifyouoperate
achainsawinastateorlocalewhere
suchregulationsexist,youarelegally
responsibleformaintainingtheoperat-
ingconditionoftheseparts.Failureto
dosoisaviolationofthelaw.Referto
theCustomerResponsibilitieschartin
theMAINTENANCEsection.
STANDARDS:Thischainsawislisted
byUnderwritersLaboratories,Inc.in
accordancewithAmericanNational
StandardsforGasoline-PoweredChain
SawsSafetyRequirements(ANSI
B175.1-2000).
_WARNING:Beforeusingchain
saw,ensureallfastenersaresecure.
CARTONCONTENTS
Checkcartoncontentsagainstthefol-
lowinglist.
Model 358,341900
• Chain saw (fully assembled)
• Chain adjustment tool (bar tool)
• 2-cycle engine oil
• Carrying case
Examine parts for damage. Do not use
damaged parts.
If you need assistance or find that parts
are missing or damaged, please call
1-800-235-5878.
NOTE: It is normal to hear the fuel filter
rattle in an empty fuel tank.
Your unit has been factory tested and
the carburetor precisely adjusted. As a
result you may smell gasoline or find a
drop of oil/fuel residue on the muffler
when you unpack the unit.
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.
KNOW YOUR CHAIN SAW
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the
location of the various controls and adjustments. Save this manual for future ref-
erence.
Chain Front Hand Guard j Front Handle
Adjustment Tool
(Bar Tool) Starter Rope
/ ON/STOP
Switch Choke/
Fast Idle
Chain Muffler Lever
/
Bar Bar Oil Fill Cap _ I
Sprocket
Hole Starter Housl/ng
7
Fuel Mix Fill Cap Primer Bulb
To Next Page
Loading...
