Craftsman 358.740160 - User Manual

Questions and Answers

C
Christopher JonesAug 3, 2025
What to do if my Craftsman 358.740160 engine will not start?
- K
  Kim CrossAug 3, 2025
  If your Craftsman Saw engine won't start or runs only briefly, several factors could be at play. The ignition switch might be off, so ensure it's properly engaged. The engine could be flooded; in that case, consult the “Starting a Flooded Engine” instructions in the OPERATION section. The fuel tank might be empty, so fill it with the correct fuel mixture, referencing “FUELING THE ENGINE” in the STARTING AND STOPPING section. A faulty spark plug could also be the culprit, so consider installing a new one, following the “SPARK PLUG” guidelines in the MAINTENANCE section. Lastly, fuel might not be reaching the carburetor. Check for a dirty fuel filter and replace if necessary, and inspect the fuel line for kinks or splits.
M
Melissa ThomasAug 9, 2025
Why does my Craftsman 358.740160 Saw engine smoke excessively?
- B
  Brent DavisAug 9, 2025
  If your Craftsman Saw engine smokes excessively, it might be due to too much oil mixed with the gasoline. To resolve this, empty the fuel tank and refill it with the correct fuel mixture.
M
Mark DiazAug 15, 2025
What to do if Craftsman 358.740160 engine lacks power?
- E
  Eric KnoxAug 15, 2025
  If your Craftsman Saw engine won't accelerate, lacks power, or dies under a load, the air filter might be dirty, so try cleaning or replacing it. The spark plug could be fouled, so clean or replace it and regap. Also, the chain brake might be locked; unlock it by referring to “STARTING POSITION” in the STARTING AND STOPPING section.
T
Troy JohnsonAug 21, 2025
Why does the chain move at idle speed on my Craftsman Saw?
- B
  brandonvaughnAug 21, 2025
  If the chain moves at idle speed on your Craftsman Saw, the idle speed likely requires adjustment. Refer to “CARBURETOR ADJUSTMENT” in the MAINTENANCE Section.
R
Regina MelendezAug 27, 2025
How to fix a Craftsman 358.740160 Saw engine that will not idle properly?
- R
  ramseypaulaAug 27, 2025
  If your Craftsman Saw engine will not idle properly, the idle speed may need adjustment. Consult “CARBURETOR ADJUSTMENT” in the MAINTENANCE Section.