Craftsman 358.795620 User Manual

IMPORTANT MANUAL
Do Not Throw Away
Operator's
Manual
Model No.
358.795620
WARNING:
Read the Operator's Mandrel and
FoIlow All Warnings and Safety
Instructions. Failure To Do So
Can Result in Serious Iujur_
Always Wear gye Protection
SE_Ai_-_.._;/__RRFTS.MI:iNo
.GASOLINE HEDGE TRIMMER
• Assembly
• Operation
• Maintenance
e Repair Parts
S_rs, Roebuc& and Ce., H_ff'mar_-Es_tes, _ _9!?@4/SA
530-082436-05/05/94 © 1994, Sears, Roebuck andCb.

Craftsman 358.795620 Specifications

General

Brand	Craftsman
Model	358.795620
Category	Lawn and Garden Equipment
Language	English

Summary

SEARS Operator's Manual

General Safety Warnings

Power Tool Danger and Operator Responsibility

Warns about the unit's danger and the operator's crucial role.

Cutting Blade Hazards

Alerts to risks from thrown objects and proximity to the blade.

Hazard Zone and Bystander Safety

Defines the safe zone and the need to keep others away.

Blade Movement After Trigger Release

Informs that the blade continues to move briefly after the trigger is released.

Manual and Label Compliance

Stresses adherence to manual instructions and safety labels.

Operator and Unit Safety Guidelines

Operator Safety Precautions

Covers proper dress, alertness, and safe handling of the unit.

Fuel Handling and Safety

Guidelines for safe fuel mixing, pouring, and storage.

Trimming Area Safety

Unit Familiarization and Pre-Operation

Pre-Operation Checks

Essential safety and operational checks before starting the unit.

Engine Information and Fueling

Starting Engine Preparation

Gasoline and Oil Mixture Guidelines

Details the required fuel mix ratio and proper mixing procedure.

Starting the Hedge Trimmer

Pre-Start Engine Procedures

Starting a Cold Engine

Detailed steps for starting the engine from a cold state.

Starting a Warm Engine

Using Your Hedge Trimmer

Hedge Trimmer Safety

General safety rules for operating the hedge trimmer.

Operator Safety During Use

Operating Tips

Trimming Techniques

General Maintenance Procedures

Maintenance Safety Precautions

Blade Maintenance and Cleaning

Carburetor Adjustments

Troubleshooting Carburetor Issues

Idle Speed Adjustment

Procedure to set the engine's idle speed correctly.

Acceleration Check Procedure

Carburetor Adjustment Details

Deceleration Check

Low Speed Mixture Adjustment

High Speed Mixture Adjustment

Adjusting the high speed screw for power and smooth running.

Troubleshooting Guide

Engine Starting Problems

Engine Performance Issues

Blade Movement and Power Issues