To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.795660 and is the answer not in the manual?
General| Brand | Craftsman |
|---|---|
| Model | 358.795660 |
| Category | Lawn and Garden Equipment |
| Language | English |
Follow safety guidelines for mixing, pouring, storing, and using fuel to prevent fire hazards.
Operate the unit safely, avoiding hazards, ensuring proper footing, and keeping body parts away from the blade.
Read fuel information and safety rules before fueling the unit; call for clarification if needed.
Mix unleaded gasoline with 2-cycle oil at a 40:1 ratio; do not use automotive or boat oil.
Follow step-by-step instructions for starting a cold or recently stalled engine using choke and primer.
Follow the instructions for starting a warm engine, which differs slightly from cold starting procedures.
Learn how to start a flooded engine by clearing excess fuel and following specific procedures.
Always disconnect the spark plug before performing maintenance, except for carburetor adjustments.
Adjust carburetor settings carefully to avoid permanent engine damage; seek assistance if unsure.
Adjust the idle speed screw to ensure the blade does not move at idle to prevent injury.
Set the low speed mixture screw (L) at the midpoint between two positions for optimal idle.
Adjust the high speed mixture screw (H) for smooth engine operation at full throttle without damage.
Troubleshoot common causes like flooding, empty fuel tank, or spark plug issues.
Address issues with carburetor adjustment, worn seals, or low compression affecting idle.
Diagnose problems like dirty air filters, fouled spark plugs, or carburetor issues affecting performance.
