To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 358.796355 and is the answer not in the manual?
General| Model Number | 358.796355 |
|---|---|
| Engine Displacement | 190cc |
| Engine Type | 4-Cycle |
| Cutting Height | 1.25 - 3.75 in. |
| Wheel Size | 8 inches front, 9 inches rear |
Details the terms of the one-year warranty for the hedge trimmer.
Understand the hedge trimmer and its controls before operation.
Prepare the work area and yourself for safe hedge trimmer operation.
Guidelines for safe mixing, pouring, and storage of fuel for the engine.
Crucial safety practices for using the hedge trimmer during operation.
Proper upkeep procedures to ensure the unit's longevity and safety.
How to start and stop the engine using the main power switch.
Using the choke lever to assist with cold engine starting.
Instructions and precautions for safely adding fuel to the hedge trimmer.
Using the primer bulb and throttle trigger for engine control.
Recommendations for efficient and safe operation of the hedge trimmer.
Step-by-step guide for starting the hedge trimmer when the engine is cold.
Procedure for starting the hedge trimmer when the engine is already warm.
How to restart the engine if it becomes flooded with fuel.
Owner's obligations for maintaining the hedge trimmer according to the manual.
Inspecting the unit for loose, damaged, or worn components before use.
Identifying and replacing parts that show signs of wear or damage.
Procedures for cleaning the exterior of the unit and its labels.
Instructions on how to clean the air filter for optimal engine performance.
Checking the muffler and spark screen for proper function and emissions.
Steps for adjusting the carburetor for proper engine idling and performance.
Preparing the unit for long-term storage at the end of the season.
Recommendations for fuel stabilizer use and proper fuel system preparation for storage.
Common causes and remedies for an engine that fails to start.
Troubleshooting steps for when the engine idles incorrectly.
Diagnosing and fixing problems like lack of power or stalling under load.
Identifying causes and solutions for excessive smoke from the engine.
Addressing issues that cause the engine to overheat during operation.
Explanation of owner's and manufacturer's rights and responsibilities regarding emissions warranty.
Details on what parts are covered and how defects will be repaired or replaced.
Owner's duties in performing maintenance and avoiding abuse to maintain warranty validity.
Specifies the duration of the emissions warranty and what it covers.
Information on diagnostic charges and liability for consequential damages.
Exclusions from warranty coverage, including abuse and improper maintenance.
Impact of using non-original parts on warranty claims.
Instructions for owners on how to initiate a warranty claim.
List of engine parts covered under the emissions control warranty.
Owner's responsibility for performing required maintenance as per the manual.
