To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 875.199601 and is the answer not in the manual?
Instructions to carefully inspect the product for transit damage and tighten loose fittings before use.
Read and save all safety and operating instructions to prevent injury and property damage. Comply with all safety information.
Details the sander's applications, air inlet swivel, low noise level, and built-in regulator for speed control.
Lists performance data including free speed, pad size, weight, air consumption, and maximum air pressure.
Explains the one-year full warranty and specifies minimum air compressor tank sizes for different usage levels.
Mandates approved eye protection, recommends hearing protection, and advises on vibration exposure risks.
Details the 90 PSI maximum air pressure limit and California Prop 65 warnings for dust exposure.
Precautions for disconnecting air, trigger use, attachment security, and protecting air lines from damage.
Instructions for checking air hoses for wear, ensuring secure connections, and proper tool transport.
Recommends using designed accessories, checking RPM ratings, and warns about inhalation hazards from dust.
Advises against loose clothing/jewelry and emphasizes proper tool maintenance for safe operation.
Illustrates air hose hook-up, pre-operation flushing, and provides home shop piping tips.
Explains how to adjust tool speed with the regulator and how to attach/remove sanding pads.
Guide on connecting a vacuum hose to the sander for dust collection.
Recommends a step-by-step approach for grit selection to achieve the desired finish.
Details proper lubrication methods, including using an in-line lubricator and recommended air tool oil types.
Visual diagram of sander components and a list of all replacement parts with their part numbers.
Solutions for tool running slow, no oil, air leaks, and pressure drops, including checks and adjustments.
Addresses water in the tool or air lines, recommending separators, filters, and dryers for dry air.
Steps to resolve the sander stopping when applied to the work surface, such as unlocking the spindle.
General