How to troubleshoot a Craftsman Snow Blower when the engine fails to start?
- AAlexandria StephensAug 12, 2025
If your Craftsman Snow Blower engine won't start, there are several potential causes: 1. The choke control might not be in the ON position. To fix this, move the choke control to the ON position. 2. The spark plug wire could be disconnected. Connect the wire to the spark plug. 3. The spark plug might be faulty. Clean, adjust the gap, or replace the spark plug. 4. The fuel tank may be empty or contain stale fuel. Fill the tank with clean, fresh gasoline. 5. The engine might not be primed. Prime the engine as instructed in the Operation Section. 6. The safety key may not be inserted. Insert the key fully into the switch.