Your tool has been designed to operate
over a long period of time with a minimum
of maintenance.
If the replacement of the supply cord is
necessary, this has to be done by the
manufacturer or his agent in order to avoid
a safety hazard.
Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
• Clear the cooling vents and slots with a
clean, dry paint brush.
• Clean the housing with a clean, damp
cloth. Do not use solvents.
Accessories
Most recommended accessories for use
with your tool are available at extra cost
from your Craftsman outlet.
CAUTION: The use of any
non-recommended accessory may be
hazardous.
8
MAINTENANCE
M
To Next Page
Loading...
