Craig CHT939 - Installation; Placing on the table; Mounting the Speaker Bar onto a wall

2. Mounting the Speaker Bar onto a wall
We recommend having this speaker professionally mounted. By using the included
wall mounting accessories, the sound bar can be mounted onto a wall.
Distance Between Two Brackets
1. Placing on the table
When placing the Sound Bar on an entertainment center, bookshelf, or any type of
enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar
for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat
generated from the Sound Bar could produce a potential heat hazard.
22.36 inches (568mm)
To the wall outlet
1. Insert the small plug from the supplied AC/DC
Adaptor to the DC In Jack on the top of unit.
2. Insert the AC/DC Adaptor to the wall
outlet having AC 100-240V~; 50/60Hz.
To the AC In Jack
NOTES:
~ This AC/DC Adaptor is intended to be correctly orientated in a vertical or floor mount position.
NOTES:
~ This AC/DC Adaptor is intended to be correctly orientated in a vertical or floor mount position.
~ If Long period of time will not use the unit, unplug the AC/DC Adaptor from the wall outlet.~ If Long period of time will not use the unit, unplug the AC/DC Adaptor from the wall outlet.
To the DC IN jack on
the top of the unit.