Craig CHT940DO - General Operations Guide

BT--------------------------------------------------------------- Bluetooth
FM Frequency------------------------------------------------FM Radio
AUX 1-----------------------------------------------------------AUX IN 1
AUX 2-----------------------------------------------------------AUX IN 2
OPTI-------------------------------------------------------------Optical In
9
GENERAL OPERATIONS
1. Connect the AC/DC Adapter to the unit and wall outlet as the previous procedure.
The Power ON Indicator on the AC/DC Adapter will illuminate.
2. Press the POWER/SOURCE Button on the unit or press the
Button on the remote
control to power on the unit from standby mode.
3. Press the POWER/SOURCE Button on the unit or press SOURCE Button on the
remote control repeatedly to switch to desired mode as below:
4. During Playback:
~ Press the VOL ( Volume ) + or - Buttons on the unit or remote control to adjust volume
level as desired.
~ Press the EQ Button on remote control repeatedly to select and set equalizer mode to
~ Press the BASS +/- Buttons on remote control to adjust the sound level of bass.
~ Press the TREBLE +/- Buttons on remote control to adjust the sound level of treble.
5. When finished listening, press and hold the POWER/SOURCE Button on the unit or
press the
Button on remote control to power off ( Standby Mode ) the unit. The
Power ON indicator on the AC/DC Adapter will keep illuminate.
6. If the unit will not be used for long period of time, unplug the AC/DC Adapter from the
wall outlet. The Power ON Indicator on it will not light.
JAZZ, POP, CLAS (Classic), ROCK and NORM (Normal).
~Pressthe ( Mute ) Button on remote control to turn off the sound. Press again to
resume.