Problem Possible cause Solution
There is a high vi-
bration in the ma-
chine.
The blade is un-
balanced and
worn.
Replace the blade.
The motor shaft is
bent.
1. Stop the mo-
tor.
2. Remove the
safety key and
battery pack.
3. Inspect for
damage.
4. Repair the ma-
chine before
you start it
again.
The machine stops
during mowing.
The blade height is
too low.
Increase the blade/
cutting height.
The battery pack is
out of power.
Charge the battery
pack.
The grass clip-
pings attach to the
deck or the blade.
Remove the bat-
tery pack and
check the deck.
Operation temper-
ature of the ma-
chine is too high.
Cool the machine.
* If you cannot find the solution to these problems, go to the
service center.
8 TECHNICAL DATA
Voltage 48 V
No load speed 2800 / 3100 / min
Cut width 480 mm
Cut height 25 - 80 mm
Self-propelled speed 0.6 - 1.5 m/s
Grass catcher capacity 55 L
Weight (without battery
pack)
27.5 kg
Measured sound pressure
level
L
PA
= 76.4 dB(A) , K = 3
dB(A)
Guaranteed sound power lev-
el
L
WA.d
= 96 dB(A)
Vibration < 2.5 m/s
2
, K = 1.5 m/s
2
Battery model BAM713 and other CAM
series
Charger model CAM816 and other CAM
series
Double-insulated construc-
tion
IPX IPX4
9 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Micael Johansson
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category: Lawn Mower
Model: 48LM48SP/48LM48SPK4
(LME473)
Serial number: See product rating label
Year of Construction: See product rating label
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following parts, clauses of
harmonised standards have been used:
• EN 60335-1, EN 60335-2-77, EN 62233, EN ISO 3744,
EN 55014-1, EN 55014-2, ISO 11094, IEC 62321-3-1,
IEC 62321-4, IEC 62321-5, IEC 62321-6, IEC
62321-7-1, IEC 62321-7-2. IEC 62321-8
Conformity assessment method to Annex VI Directive
2000/14/EC.
Measured sound power level
L
WA
: 91.5 dB(A)
Guaranteed sound power level L
WA.d
: 96 dB(A)
Place, date: Malmö,
03.03.2021
Signature: Ted Qu, Quality Director
8
English
EN
To Next Page
Loading...
