EasyManua.ls Logo

Cramer RM1000 - Installing and Connecting the Charging Station

Cramer RM1000
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CRAMERTOOLS.COM
9
EN
Version 3 - 2022.09.22
The entire charging station must be inside the operating area as shown
in the figure.
Installation
Position for the charging station as follows:
In a level spot out of direct sunlight
(The front end of the charging station must not be 5 cm higher or
lower than the back end.)
Within reach of a wall socket
(The low voltage cable is 10 m long.)
With at least 3 m in front of it and 1.5 m to each side
(Do not position in confined spaces in the operating area.)
Installing and Connecting the Charging Station
1m
>3m
10m
35cm

Related product manuals