Cramer RM2700 - Technical Specifications; Product Specifications Overview; Mowing Performance Data; Connectivity and RF Data

CRAMERTOOLS.COM
Version 3 - 2022.08.30
8
EN
Technical Data
RM1000 RM1500 RM2000 RM2700
Dimensions:
Height 26 cm 26 cm 26 cm 26 cm
Length 62 cm 62 cm 62 cm 62 cm
Width 50 cm 50 cm 50 cm 50 cm
Weight 11 kg 11 kg 11 kg 11 kg
Electrical system:
Battery, Special Lithium-Ion battery
24 V / 2.0 Ah, Part No.
211022355 /
T0100607-00
24 V / 2.0 Ah, Part No.
211022355 /
T0100607-00
24 V / 2.0 Ah, Part No.
211022355 /
T0100607-00
24 V / 2.0 Ah, Part No.
211022355 /
T0100607-00
24 V / 4.0 Ah, Part No.
T0100273-00 /
T0100609-00
24 V / 4.0 Ah, Part No.
T0100273-00 /
T0100609-00
24 V / 4.0 Ah, Part No.
T0100273-00 /
T0100609-00
24 V / 4.0 Ah, Part No.
T0100273-00 /
T0100609-00
Power supply 220-240 V/32 V DC 220-240 V/32 V DC 220-240 V/32 V DC 220-240 V/32V DC
Low voltage cable length 10 m 10 m 10 m 10 m
Mean energy consumption at maximum use 8 kWh/month for a
working area of 1,000
m
2
10 kWh/month for a
working area of 1,500
m
2
12 kWh/month for a
working area of 2,000
m
2
14 kWh/month for a
working area of 2,700
m
2
Charge current 1.3 A DC 1.3 A DC 2.4 A DC 2.4 A DC
Average charging time (with 211022355 battery) 140 minutes 70 minutes 40 minutes 40 minutes
Average charging time (with T0100273-00 battery)
270 minutes 130 minutes 70 minutes 70 minutes
Average cutting time (with 211022355 battery)
70 minutes 70 minutes 70 minutes 60 minutes
Average cutting time (with T0100273-00 battery) 150 minutes 150 minutes 150 minutes 140 minutes
Noise emissions: *)
Measured sound power noise level **) 55 dB (A) 55 dB (A) 55 dB (A) 55 dB (A)
Guaranteed sound power noise level 57 dB (A) 57 dB (A) 57 dB (A) 57 dB (A)
Sound pressure noise level ***) 44 dB (A) 44 dB (A) 44 dB (A) 44 dB (A)
Mowing:
Cutting system Three pivoted cutting
blades
Three pivoted cutting
blades
Three pivoted cutting
blades
Three pivoted cutting
blades
Average power consumption during cutting 25 W ± 20% 25 W ± 20% 25 W ± 20% 25 W ± 20%
Cutting height 2-6 cm 2-6 cm 2-6 cm 2-6 cm
Cutting width 22 cm 22 cm 22 cm 22 cm
Narrowest possible passage 60 cm 60 cm 60 cm 60 cm
Maximum slope for cutting area 35% 35% 35% 35%
Maximum slope for boundary wire 15% 15% 15% 15%
Maximum length boundary wire 800 m 800 m 800 m 800 m
Maximum working capacity 1,000 m
2
1,500 m
2
2,000 m
2
2,700 m
2
Recommended area capacity 0 - 700 m
2
500 - 1,200 m
2
1000 - 1,700 m
2
1500 - 2400 m
2
IP classification:
Mower IPX5 IPX5 IPX5 IPX5
Charging station IPX3 IPX3 IPX3 IPX3
Power supply IP67 IP67 IP67 IP67
Radio Frequency Data Sheet
LTE & GSM Short Range Devices (SRD)
(Boundary Wire)z
Frequency Bands LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/
B26/B27/B28/B66/B71/B85 GSM: 850/900/1800/1900 MHz
0~148.5KHz
Max Output Power
(dBm)
LTE-FDD: 21 dBm +1.7/-3 dB
GSM850/EGSM900: 33 dBm ±2 dB
DCS1800/PCS1900: 30 dBm ±2 dB
GSM850/EGSM900 (8-PSK): 27 dBm ±3 dB
DCS1800/PCS1900 (8-PSK): 26 dBm ±3 dB
NA
*) The noise emission declarations conforms to EN 50636-2-107
**) uncertainties KWA, 2 dB (A)
***) uncertainties KPA, 2 dB (A)