Page 13 of 29
Config 3 - Configuration Switch 3 - POS Message
This code is used to disable the point of sale message. Config 3 0 = enabled, Config 3 1 = disabled. Press key
number 4 and “Config 3 #” will be displayed, with the “#” flashing. Press key numbers 2 or 3 to scroll between
“Config 3 0” and “Config 3 1”. Press key number 4 with the display flashing the setting you wish to use. Press
key number 1 to return to “Config 3”. Press key number 2 to scroll to “Config 4”.
Config 4 - Configuration Switch 4 - Automatic Viewing of Historical Sales and Cash Accounting, Error Codes or
No Error Codes
This code is used to enable viewing of historical sales, historical cash, Error Codes or No Errors automatically
when the door is opened. To enable automatic viewing option enter “Config 1”; to disable enter “Config 4 At
“Config 4 0” Error Codes or No Errors automatically displays when the door is open. Press key number 4 and
“Config 4 #” will be displayed, with the “#” flashing. Press key number 2 or 3 to scroll between “Config 4 0” and
“Config 4 1”. Press key number 4 with the display flashing the setting you wish to use. Press key number 1 to
return to “Config 4”. Press key number 2 to scroll to “Config 5”.
Config 5 - Configuration Switch 5 – Door
Switch Reset Status
This code is used to reset all interval data when the door switch is cycled and at least one data register is read
via the display when set at “Config 5 1” or to reset all interval data only when the “RESET” command is received
via handheld or portable computer when set at “Config 5 0”. Press key number 4 and “Config 5 #” will be
displayed, with the “#” flashing. Press key numbers 2 or 3 to scroll between “Config 5 0” and “Config 5 1”. Press
key number 4 with the display flashing the setting you wish to use. Press key number 1 to return to “Config 5”.
Press key number 2 to scroll to “Config 6”.
Config 6 - Configuration Switch 6 – Reserved, this code is reserved for future use. Press key number 2 to scroll
to “Config 7”.
Config 7 - Configuration Switch 7 - Save Credit
This code is used to determine how long a credit will be saved. C7 0 will save the credit for five minutes. Config
7 1 will save the credit indefinitely. Press key number 4 and “Config 7 #” will be displayed, with the “#” flashing.
Press key number 2 or 3 to scroll between Config 7 0 and Config 7 1. Press key number 4 with the display flashing
the setting you wish to use. Press key number 1 to return to “Config 7”. Press key number 2 to scroll to “Config
8”.
Config 8 - Configuration Switch 8 - Force Vend
This code is used to determine escrow to select or escrow to price. Config 8 0 will set vender to escrow to select
and Config 8 1 will set vender to escrow to price. Press key number 4 and “Config 8 #” will be displayed, with
the “#” flashing. Press key number 2 or 3 to scroll between Config 8 0 and Config 8 1. Press key number 4 with
the display flashing the setting you wish to use. Press key number 1 to return to “Config 8”. Press key number
2 to scroll to “Config 9”.
Config 9 - Configuration Switch 9 - Multi Vend
This code is used to allow multiple vends without re-depositing funds. Config 9 0 will not allow multiple vends
and Config 9 1 will allow multiple vends. Press key number 4 and “Config 9 #” will be displayed, with the “#”
flashing. Press key number 2 or 3 to scroll between Config 9 0 and Config 9 1. Press key number 4 with the
display flashing the setting you wish to use. Press key number 1 to return to “Config 9”. Press key number 2 to
scroll to “Config 10”.
Config 10 - Configuration Switch 10 - Bill Escrow Inhibit
This code is used to allow last bill that meets or exceeds maximum vend price to be held in escrow. Config 10 0
will escrow bill and Config 10 1 will not escrow bill (or stack the bill). Press key number 4 and “Config 10 #” will
be displayed, with the “#” flashing. Press key number 2 or 3 to scroll between Config 10 0 and Config 10 1.
To Next Page
Loading...
Need help?
General
