Page 19 of 29
“Lighting #” - Lighting / P.O.S. Display Control
This function is used to turn the lights (if supported) and P.O.S. Display Message off during selection blocking period 1. 0
= disable or on; 1 = enable or off.
Press key number 4 and the “#” will start flashing.
Press key number 2 or 3 to scroll between “Lighting 0” and “Lighting 1”. Press key number 4 with the display showing
the setting you wish to use. Display will return to “Lighting X”. Press key number 1 to return to “Select Block 1”. Press
key number 2 to scroll to “Select Block 2”.
*”Select Block 2" - BLOCK SELECTION BANK 2 ROUTINE
This function is a second set used to set selection(s) which will be blocked during certain periods of the day. Press key
number 4 will enter “Enable X”.
“Enable X” - Blocking Enable Routine.
Set this function using instruction for “Enable X” in “Select Block 1”.
“Start Time” - Start Selection Blocking Routine
This function is used to set the day(s) and times to start selection blocking. Press selection button 4 and “Start Day”
will show on the display.
“Start Day” - Day of Week Start Setting
Set this feature using instructions for “Select Block 1”, “Start Time”, “Start Day”.
“Start Hour” - Start Hour and Minute Setting
Set this function using instructions for “Select Block 1”, “Start Time”, “Start Hour”.
“Stop Time” - Stop Selection Blocking Routine.
This function is used to set the day(s) and times to stop selection blocking. Press key number 4 and “Day” will show
on the display.
“Day” - Day of Week Stop Setting
Set this function using instructions for “Select Block 1”, “Stop Time”, “Stop Day”.
“Hour” - Stop Hour and Minute Setting
Set this function using instructions for “Select Block 1”, “Stop Time”, “Stop Hour”. Press key number 1 to return
to “Stop Time”.
Press key number 2 to scroll to “Selection”.
“Selection” - Selection to Be Affected By Blocking
This function is used to set selection(s) which will be blocked during certain periods of the day. Set this function
using instructions for “Select Block 1”, “Selection”. Press key number 1 to return to “Selection”.
Press key number 2 to scroll to “Lighting #”.
“Lighting #” - Lighting / P.O.S. Display Control
This function is used to turn the lights (if supported) and P.O.S. Display Message off during selection blocking period
2. Set this function using instructions for “Select Block 1”, “Lighting”. Press key number 1 to return to “Select Block
2”. Press key number 2 to scroll to “Select Discount”.
*”Select Discount” - DISCOUNT SETTING ROUTINE
This function is used to set the day(s) and times to allow discount prices. Press key number 4 and Enable # will show on
the display.
“Enable #” - Discount Setting Enable Routine
This function is used to disable discounting “Enable 0” or enable discounting “Enable 1”. Press key number 4
and the current “Enable X” setting will be displayed. Press key number 2 or 3 to scroll between “Enable 0” and
“Enable 1”. Press key number 4 with the display blinking the setting you wish to use. Display will return to
“Enable X”. Press key number 2 to scroll to “Start Time”.
“Start Time” - Start Discount Pricing
This function is used to set the day(s) and
times to start discount prices. Press key number 4 and “Start Day” will show on the display.
“Start Day” - Day of the Week Start Setting
Set this feature using instructions for “Select Block 1”, “Start Time”, “Start Day”.
“Start Hour” - Start Hour and Minute Settings
Set this feature using instructions for “Select Block 1, “Start” Time, “Start Hour”.
To Next Page
Loading...
Need help?
General
