EasyManua.ls Logo

Crane EPRO-150 - Optional Electrical Control Boxes

Crane EPRO-150
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPTIONAL ELECTRICAL CONTROL BOXES
CRANE ENVIRONMENTAL CONTROLLER CE1 6/26/02
(110-120V 1PH)
SPEPCIFICATIONS
Controller:
UL/CUL listed Industrial Panel
Enclosure:
8 x 6 x 4 NEMA 4X
Power:
120/240VAC 50/60Hz 6 Watts
Environment:
-22F(-30C) to 140F (60C), 0-95% RH, non-condensing
Inputs:
Low Pressure – Closed to run
Pretreat – Closed to run
Tank Full High – Closed to run
Tank Full Low – Closed to run
Outputs:
RO pump – 120V/1HP, 240V/3HP
Inlet Solenoid – 120/240V, 5A
Flush Solenoid – 120/240V, 5A
Cables:
Power – 120V/8’, 12AWG, SJT w/15A plug, 240V/8’, 12AWG, SJT w/20A plug
RO PUMP – 4’, 12AWG, SJTw/#8 fork terminals
Inlet Solenoid – 4’, 18AWG, SJT w/attached solenoid connector
Flush Solenoid – 4’, 18AWG, SJT w/attached solenoid connector
Time Delays:
RO Start – 8 seconds
Tank Full – 5 seconds
Tank Full Restart – 2 seconds
Low Pressure – 4 seconds
Pretreat – 4 seconds
Auto Reset – 15 minutes
Flush Interval – 10 hours, elapsed time
Flush Time – 5 minutes
EPRO 150-8000 O&M MANUAL Rev.04/03 Page 44 of 55