Need help?Do you have a question about the Crate CA30D and is the answer not in the manual?
Power| output power rating | 30 watts RMS @ 1% distortion |
|---|---|
| power requirements | 120VAC, 60Hz, 50VA 100/115VAC, 50/60Hz, 50VA 230VAC, 50/60Hz, 50VA |
Frequency and Impedance| high frequency adjustment | +/-15dB @ 10kHz |
|---|---|
| mid frequency adjustment | +/-15dB @ 400–1.2kHz (Contour) |
| low frequency adjustment | +/-15dB @ 80Hz |
| input impedance | 1.5M ohm |
| input sensitivity | 20mV RMS |
| max input signal | 10v RMS (28v peak to peak) |
| insert jack input impedance | 44k ohm |
| insert jack output impedance | 2.2k ohm |
| line out output impedance | 2.2k ohm (Lo-Z), 2.2k ohm (Hi-Z) |
Speaker| internal speaker | 8” Poly cone coaxial with dome tweeter |
|---|---|
| speaker impedance | 4 ohms |
| speaker power | 50 watts |
| voice coil | 1” |
Weight and Dimensions| height | 13” |
|---|---|
| width | 15” |
| depth | 12” |
| weight | 30 lbs |
To Next Page
