Crate CA6110D - User Manual

CA6110D
Acoustic Amplifier
User’s Guide

Crate CA6110D Specifications

Power Specifications

output power rating	60 watts @ <1% THD
power requirements	120VAC, 60Hz, 70VA, 100/115VAC, 50/60Hz, 70VA, 230VAC, 50/60Hz, 70VA

Audio Input/Output

input impedance	3.3M ohm High-Z, 3k ohm Low-Z
input sensitivity	5mV High-Z, 2mV Low-Z
sens. to eff send/line out	6mV High-Z, 3mV Low-Z

Internal Components

internal woofer	10” w/polypropylene cone, rubber surround, 30.5oz magnet, 1.5” voice coil, 8 ohms, 75w RMS, 95dB 1w 1m
internal tweeter	high efficiency Piezo, 110dB 1w 1m
internal crossover	passive type

Size and Weight

height	17”
width	16”
depth	14”
weight	37 lbs

Summary

Important Safety Instructions

About the Crate Acoustic CA6110 D

The Front Panel

Channel Controls

Details input, gain, EQ, and effects send controls for amplifier channels.

Master Controls

Controls for CD input, tweeter level, feedback filters, and master output level.

Effects Controls

Controls for selecting and adjusting digital signal processing effects.

The Rear Panel

Power and Speaker Connections

Details power switch and external speaker output jack.

Footswitch and Effects Loop Connections

Explains jacks for feedback filter, DSP bank, aux in, and effects send.

Line Output and Ground Lift

Details line out level, high/low impedance balanced outputs, and ground lift switch.

AC Power Connection

Information about connecting the AC power cord safely.

To Eliminate Instrument Feedback

The DSP Section

System Block Diagram

Technical Specifications