EasyManuals Logo

Crate CA30D User Manual

Crate CA30D
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
CA30D Acoustic Amplifier
Introduction:
Crate Acoustic amplifiers are Made With Pride in the U.S.A.
To keep this amplifier looking its best, avoid abrasive cleansers.
Wipe the cabinet clean using a slightly dampened cloth. Never use
brass cleaners on the hardware since they could damage their pro-
tective coatings.
Congratulations!
You are now the proud owner of one of Crate’s latest contributions to
the world of acoustic amplification, the CA30D. This compact amplifier
delivers a strong 30 watts of clear musical power and incorporates two
inputs (each with a gain control), three bands of equalization, plus Crate’s
Contour control for added tonal flexibility. The CA30D features Crate’s
DSP digital reverb and effects, a front panel Insert (effects loop), and a
Line Out jack. An 8” Polypropylene cone coaxial speaker delivers smooth
clear sound with excellent projection and fidelity.
Your CA30D is Musician Made in the U.S.A., using only the best com-
ponents. Extensive testing at the hands (and ears) of skilled technicians
and musicians insures you that this amplifier is the absolute best it can be.
In order to get the most out of your new amplifier, we strongly urge
you to go over the information contained in this manual before you begin
playing.
And thank you for choosing CRATE.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Crate CA30D and is the answer not in the manual?

Crate CA30D Specifications

Power IconPower
output power rating30 watts RMS @ 1% distortion
power requirements120VAC, 60Hz, 50VA 100/115VAC, 50/60Hz, 50VA 230VAC, 50/60Hz, 50VA
Frequency and Impedance IconFrequency and Impedance
high frequency adjustment+/-15dB @ 10kHz
mid frequency adjustment+/-15dB @ 400–1.2kHz (Contour)
low frequency adjustment+/-15dB @ 80Hz
input impedance1.5M ohm
input sensitivity20mV RMS
max input signal10v RMS (28v peak to peak)
insert jack input impedance44k ohm
insert jack output impedance2.2k ohm
line out output impedance2.2k ohm (Lo-Z), 2.2k ohm (Hi-Z)
Speaker IconSpeaker
internal speaker8” Poly cone coaxial with dome tweeter
speaker impedance4 ohms
speaker power50 watts
voice coil1”
Weight and Dimensions IconWeight and Dimensions
height13”
width15”
depth12”
weight30 lbs

Related product manuals