Need help?Do you have a question about the Crate EXCALIBUR GX-900H and is the answer not in the manual?
Power| input power requirements | 120VAC, 60Hz, 240 watts max. |
|---|
Output| output power rating | 90 watts RMS @ 5% THD, 2 ohm load |
|---|
Fuse| fuse rating and type | 2A Normal Blo, 250V Internal, 100VAC-120VAC; 1A Slo Blo, 250V Internal, 230 VAC |
|---|
Cabinet| cabinet size | 11.63” H x 30.75” W x 11” D |
|---|---|
| weight | 35 lbs. |
Power| input power requirements | 120VAC, 60Hz, 500 watts max. |
|---|
Output| output power rating | 220 watts RMS @ 5% THD, 2 ohm load |
|---|
Fuse| fuse rating and type | 5A Normal Blo, 250V Internal, 100VAC-120VAC; 3A Normal Blo, 250V Internal, 230VAC |
|---|
Input| maximum input signal level accepted | 8 volts peak to peak |
|---|---|
| input impedance | 470 k ohms |
System Gain| total system gain channel B | 54 dB @ 1 kHz, all controls at “10”, Bright off |
|---|---|
| total system gain channel A gain one | 69 dB @ 1 kHz, all controls at “10” |
| total system gain channel A gain two | 86 dB @ 1 kHz, all controls at “10” |
Channel B| low | 25 dB range @ 70 Hz |
|---|---|
| mid | 14 dB range @ 800 Hz |
| high | 29 dB range @ 10 kHz |
| bright | 7 dB boost @ 10 kHz |
Channel A| low | 18 dB range @ 100 Hz |
|---|---|
| mid | 10 dB range @ 1 kHz |
| high | 17 dB range @ 6 kHz |
Introduces the Crate GX-900H and GX-2200H as feature-packed, professional-strength powerhouses.
Features solid state circuitry for reliable service and incredible tones.
Two separate channels with independent level, tone, and reverb controls.
Two gain controls for distortion channel, accessible via front-panel or footswitch.
Footswitch controls channel selection and dual gains for distortion channel.
Effects loop for noiseless use of processors and effects.
Features black Tolex covering, silver logo/hardware for cosmetic appeal and stage presence.
Amplifier is musician-made in the U.S.A.
Offers an exclusive 5-year warranty (US only), activated by returning survey card.
Details the input jack and controls for Channel A, including gain, EQ, and level settings.
Explains controls for Channel B, including EQ, level, bright switch, and reverb for both channels.
Describes the channel select switch, footswitch jack, and power indicator.
Details the EFFECTS LOOP LINE OUT and LINE IN jacks for connecting external processors.
Explains the SPEAKER jacks for connecting to speaker cabinets, including load compatibility.
Describes the POWER CORD connection to a grounded AC outlet.
Provides suggested settings for achieving clean guitar tones, like 'Glass should be this clean!'.
Offers settings for 'Go wash your hands.' (dirty blues) and 'You need a bath!' (grungy) sounds.
Presents settings for hard rock, heavy metal, and mosh pit sounds ('Led-Aero-Black Sab-Drix', 'Shred it don't forget it.', 'Meet me in the Pit!').
Visual representation of the amplifier's internal signal flow and component connections.
Details maximum input signal, input power requirements, impedance, and total system gain.
Provides output power ratings and equalization (EQ) frequency ranges for both channels.
Lists fuse ratings, cabinet dimensions, and the overall weight of the amplifier.
To Next Page
