Crate GFX-65T User Manual

GFX-65T TECHNICAL SPECIFICATIONS:
Output Power Rating 65W RMS @ 5% THD, 4Ω, 120 VAC
Speaker Size and Rating (1) Custom Design 12”, 4Ω
Input Impedance 470kΩ
Total System Gain Overdrive Ch Gain 1: 88dB, all controls @10; Gain 2: 110dB
Clean Ch 58dB, all controls @10
Maximum Input Signal Accepted 7 volts peak-to-peak
Overdrive Channel Low Control 11dB range @ 80Hz
Shape Control Proprietary Circuit
High Control 10dB range @10kHz
Clean Channel Low Control 22dB range @ 80Hz
Mid Control 14dB range @ 600Hz
High Control 28dB range @ 10kHz
Power Requirements 120 VAC, 60Hz, 90VA; 100/115VAC, 50/60Hz, 90VA;
100/115VAC, 50/60Hz, 90VA
Size and Weight 17-1/2” H x 20” W x 11” D, 34 lbs.
The GFX-65T is covered with a durable charcoal gray Tolex material: wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
www.crateamps.com
@2001 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63301
47-475-05 • 09/01
GFX-65T Guitar Amplifier with DSP & Channel Tracking
Declaration Of Conformity
#34, Effective 01-01-2001
Manufacturer’s Name: SLM Electronics
Production Facility: 11880 Borman Drive, St. Louis, MO 63146, USA
Production Facility: 700 Hwy 202 W, Yellville, AR 72687, USA
Shipping Facility: 1400 Ferguson Ave., St. Louis, MO 63133, USA
Office Facility: 1400 Ferguson Ave., St. Louis, MO 63133, USA
Product Type: Audio Amplifier
Complies with Standards:
LVD: 92/31/EEC, 93/68/EEC, & 73/23/EWG
Safety: EN60065
EMC: EN55013, EN55020, EN55022, EN61000-3-2,
& EN61000-3-3
Supplementary information provided by your local Sales & Services Office or:
SLM Electronics - R & D Engineering
1901 Congressional Drive, St Louis, MO 63146, USA
Tel.: 314-569-0141, Fax: 314-569-0175

Crate GFX-65T Specifications

Power

output power rating	65W RMS @ 5% THD, 4Ω, 120 VAC
power requirements	120 VAC, 60Hz, 90VA; 100/115VAC, 50/60Hz, 90VA

Audio Characteristics

input impedance	470kΩ
total system gain overdrive channel gain 1	88dB, all controls @10
total system gain overdrive channel gain 2	110dB
total system gain clean channel	58dB, all controls @10
maximum input signal accepted	7 volts peak-to-peak

Dimensions and Weight

speaker size and rating	12”, 4Ω
size	17-1/2” H x 20” W x 11” D
weight	34 lbs