At the bottom of the screen there is a bar where the brightness of
the screen can be adjusted. The screen brightness can be brought
to the desired value by sliding the bar to the right and left.
The sensor on the Crawler Smart Panel measures the atmospheric
pressure instantly. These values can be accessed from the Settings
Menu.
Low Voltage Mode and Warning
Crawler Smart Panel constantly monitors the battery status,
performs various measurements and ensures long-lasting and
efficient use of the battery. Low voltage protection is activated when
the battery voltage drops below 10.5 voltage and the smart panel
switches to battery protection mode. In this mode, the power of all
systems connected to the smart panel is cut off and the warning in
the image below appears on the screen.
In this case, the battery should be charged as soon as possible. If
the battery charge at the critical energy level drops further, the
battery may be damaged completely by chemical degradation or its
lifespan may be shortened. Devices connected to ANKA300 should
not be used while there is this warning on the screen. If there is a
working device, it should be turned off or the ANKA300 should be
connected to the charger using the charging cable. Otherwise, the
product is out of warranty.
To Next Page
Loading...