IX. Troubleshooting
Error Code: 01
Machine three-axis angle data abnormal, operation stopped.
Please power off and check if the worktable is shaking, if the machine frame is securely installed, and if all screws are tightened.
Error Code: 02
No G-Code files in the root directory of the (self-provided) USB drive.
Please check if the file extension in the (self-provided) USB drive is ".gcode/.gc/.nc", and ensure the file is stored in the root directory.
Error Code: 14
Main CPU temperature too high.
Please check if the ambient temperature is too high. It is recommended to wait for the host to cool down to a suitable temperature before working.
Error Code: 24
Machine is not in a closed state.
Please close the protective cover and drawer. After closing, press the start button on the device to continue working.
Error Code: 25
Air pump abnormal.
Please contact after-sales service for relevant technical support.
Brand Website: www.crealityfalcon.com E-mail: support@crealityfalcon.com
Business Tel: +86 755-8523 4565 Company Website: www.creality.com
Room 1205, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen, China 518131
SHENZHEN CREALITY ECOSYSTEM TECHNOLOGY CO., LTD.
Creality Falcon Wiki Ocial Website
19
To Next Page
Loading...