CreatBot DS - Page 38

SticktheKaptontape
Stickthekaptontapetothebuildplate.
Itisthehightemperatureresistancedoublesided
tape,itcontainsthreelayers.
1Cleantheplatecarefullytoensuretheclean
andtidy,itwillhelpyouavoidbubblesafter
applyingthetapeonit.
Takethetapeout.Ifcoveringtheplate
completely,itwillneed3linesofthetape.
2Uncoveronesideofthetape,andthentryto
stickitontheplate.Pleaseensurethetapeis
smoothenoughwithoutanybubbles.
3Youcanusetheyellowboardintoolboxto
pushandpressitwhilesticking.
4Cutthetapeoffatthesamewidthoftheplate.
5Stickthesecondlineinthesameway.
6Cutoffthepartsonthescrewswhensticking
thethirdline.