CreatBot DS - Page 53

A:1.Gcodefilesavedincompletely.
2.USBconnectioncablehasproblemwhilechoosingonlineprintingorcomputerisinstandbymodel.
3.Somethingwrongwiththepoweroutlet.
4.Ifprintercannotbeturnedonafterstopping,itmeansthatthefuseonthepoweroutletshouldbeblown
out.
Q:Somepartoftheobjectunabletobemodelling.
 
A:TrythesupportfunctionsintheSoftwaresoftware.



