9
ENGLISH
FAULT CAUSE SOLUTION
Indicator light will not turn on.
Power plug is not properly
inserted.
Make sure the plug is com-
pletely plugged in.
Display panel malfunction.
Send to after sales service
center for service.
Indicator light is on, but the ma-
chine does not function properly.
No selected program or function. Select a program or function.
The water reservoir is either emp-
ty or is not adequately filled.
Fill the water reservoir to
the appropriate water level
and place the reservoir in its
correct position.
Temperature sensor or water level
electrode malfunction.
Send to after sales service
center for service.
The grinding chamber does not
intake water.
Water pump abnormality.
Send to after sales service
center for service.
Blockage of water reservoir filter.
Send to after sales service
center for service.
The motor works continuously
without pause.
Water has seeped into the
machine.
Send to after sales service
center for service.
Heat is continuously applied with-
out pause
Temperature sensor abnormality.
Send to after sales service
center for service.
Button is unresponsive.
System is not fully reset after
brief power disruption.
Disconnect from power for
two minutes before powering
back on.
Display panel button malfunction.
Send to after sales service
center for service.
Ingredients are not completely
broken down.
Too much or too little ingredients.
Add ingredients according to
the recipe in the instruction
manual.
Machine failure.
Send to after sales service
center for service.
Incorrect program function
selected.
Choose the program function
appropriate for the intended
use.
Overflow.
Incorrect program function
selected.
Choose the program function
appropriate for the intended
use.
Too many or too large ingredients.
Add ingredients according to
the recipe in the instruction
manual.
Machine failure.
Send to after sales service
center for service.
Burnt pot.
Mixing chamber is not completely
clean.
Make sure the Mixing
chamber is completely clean
before use.
Too much ingredients.
Add ingredients according to
the recipe in the instruction
manual.
Operating duration is abnormally
long.
Water temperature is too low.
Use standard temperature
water.
Incorrect program function
selected.
Choose the program function
appropriate for the intended
use.
TROUBLESHOOTING
To Next Page
Loading...
