Need help?Do you have a question about the Create WINDLIGHT MINIMAL DC and is the answer not in the manual?
Prepare the installation area by ensuring adequate clearance from walls and ground for safe fan operation.
Connect the receiver wires to the fan motor wires following color indications for proper functionality.
Attach the motor to the hook and lead the wiring correctly to ensure safe and functional operation.
Securely attach the fan blades to the motor using the provided screws and washers for stable operation.
Attach the connection plate to the fan bottom, inserting screws into designated holes and securing them.
Connect the LED panel to the backplane and attach it to the panel for integrated lighting and aesthetics.
To Next Page
General