User Manual for Handheld Pulse Oximeter
14
and the maximal length for one record is limited to 4 hours.
The total storage time is up to 192 hours.
4) "8s": the least length of data record is set to 240 seconds,
and the maximal length for one record is limited to 8 hours.
The total storage time is up to 384 hours.
5) When the option is set to “OFF”, the device will not store the
measuring data.
¾
Power saving: power saving setting; two options: "on"
and "off". The factory default setting is "on". If the power
saving mode is on during measurement, and there is no
key operation for 2 minutes, the screen display will be
dim for power saving. The display brightness will resume
to normal condition by pressing any key.
¾
Volume (optional): 3 levels setting: "1", "2" and "3",
corresponding to the speaker volume icons of "
", " "
and " " respectively. The speaker volume icon indicates
the volume of any sound generated by the device for
key clicks, over-limit alerting, pulse beep and audible
probe-off indication etc..
4.4.2 Upload Data
On the menu screen, select “UPLOAD DATA” and then press
“
” key for entering into connecting status (as shown in
Figure 4-5).
Note: Make sure the provided USB data cable is well connected
between the device and PC before uploading data.
To Next Page
Loading...