User Manual for Wrist Oximeter
-29-
7.2 Cleaning and Disinfecting Instruction
Surface-clean sensor with a soft gauze by wetting
with a solution such as 75% isopropyl alcohol, if
low-level disinfection is required, use a 1:10 bleach
solution. Then surface-clean with a damp cloth and
dry with a piece of cloth.
Clean the wristband with soapy water. Please detach
the wristband from the oximeter firstly.(Refer to
Appendix for detailed disassembly method)
Caution: Do not sterilize by irradiation steam, or ethylene
oxide.
Do not use the sensor if it is damaged.
To Next Page
Loading...