About Your Camera 2-7
Turning on
Your Camera
1. Push and slide open the battery
compartment door.
2. Insert the batteries according to the
battery polarity (+ and -) symbols
indicated (see Figure 2-6).
3. Close the battery compartment door.
4. Press and hold down the Power button to
turn on your camera.
The LED turns red and the LCD monitor is
activated.
The LED turns green.
• Be sure to insert the
batteries in the
correct direction. If
not, they may leak
and damage your
camera.
• Do not mix old and
new batteries
together.
To conserve battery
power, your camera
turns the LCD off if no
operation is made
within 60 seconds. See
"Power Saving" on
page 3-7 for more
information.
Figure 2-6: Inserting batteries
Battery
compartment
door
Battery
polarity
symbols
Figure 2-7: Power button
Power
button
To Next Page
Loading...
