Installing PC-DVD Encore 5
English
2
Installing PC-DVD Encore
This chapter explains how to install and set up the PC-DVD drive and the Dxr2 decoder card in your
computer:
❑ Step 1: Learn the Windows 95 Version
❑ Step 2: Insert the Dxr2 Decoder Card
❑ Step 3: Install the Drive in Your Computer
❑ Step 4: Connect PC-DVD to Your Computer
❑ Step 5: Connect Other Devices to the Dxr2
Step 1: Learn the
Windows 95
Version
How you install Creative PC-DVD Encore may be determined by your version of Windows 95. If you do
not know your version number, follow this step to learn it. If you already know your version number, go
to “Step 2: Insert the Dxr2 Decoder Card” on page 6.
To obtain the Windows 95 version number:
1. Click the Start button, point to Settings, and click Control Panel.
2. On the Control Panel, double-click the System icon.
Your Windows 95 version number is displayed in the General tab page of the Systems Properties
dialog.
3. Note the version number:
❑ 4.00.950
❑ 4.00.950A
❑ 4.00.950B
4. Shut down Windows 95 and switch off the power.
5. Proceed to “Step 2: Insert the Dxr2 Decoder Card.
”
Dvd-fm.book Page 5 Thursday, December 17, 1998 9:44 AM
To Next Page
Loading...