Creative SB0100 - Connectivity

General Specifications A-3
Connectivity
Sound Blaster Live! Player
5.1 card
Audio Inputs
❑
One line-level analog Line input via stereo jack on rear bracket
❑
One mono Microphone analog input via stereo jack on rear bracket
❑
CD_IN line-level analog input via 4-pin Molex connector on card
❑
AUX_IN line-level analog input via 4-pin Molex connector on card
❑
TAD line-level analog input via 4-pin Molex connector on card
❑
CD_SPDIF digital input via 2-pin Molex connector on card, accepting sampling rates of 32,
44.1 and 48 kHz
Audio Outputs
❑
ANALOG/DIGITAL OUT via 4-pole 3.5mm minijack on rear bracket
• ANALOG OUT: Center and Subwoofer channels
• DIGITAL OUT: Front, Rear, Center and Subwoofer SPDIF digital outputs
❑
Three line-level analog outputs via stereo jacks on rear bracket, Line-Outs 1, 2 and 3
❑
Stereo headphone (32-ohm load) support on Front Line-Out
Interfaces
❑
D-Sub MIDI interface for connection to external MIDI devices. Doubles as Joystick port
❑
AUD_EXT 2x20 pin header for connection to Live! Drive