C-6 Troubleshooting
6. In the Properties dialog box:
If you have an
Original Configuration (Current)
check box:
• Clear the check box to disable it.
If you have a
Disable In This Hardware Profile
check box:
• Make sure that the check box is selected to disable it.
7. Click
OK
to restart Windows and for the change to take effect.
When the Gameport Joystick interface is disabled, the entry in Device Manager has a red cross.
The joystick is not working properly in some programs.
The program may use the system processor timing to calculate the joystick position. When the
processor is fast, the program may determine the position of the joystick incorrectly, assuming
that the position is out of range.
To solve this problem:
• Increase your system’s 8 bit I/O recovery time of the BIOS setting, usually under the Chipset
Feature Settings section. Or, if available, you may adjust the AT Bus speed to a slower clock.
If the problem persists, try a different joystick.
Do not attempt to make changes to
the BIOS unless you have
experience with system software.
To Next Page
Loading...
