Back to Contents Page
MS-DOS Mode Utilities: Sound Blaster Live! Value
Sound Card User's Guide
Overview • SBECFG.EXE • SBEMIXER.EXE • SBESET.EXE • SBEGO.EXE
Overview
The SB Live! Value card includes a few MS-DOS utilities. These utilities require the SB Live!
DOS driver SBEINIT.COM to be loaded.
SBECFG.EXE
Use the SBECFG.EXE utility to obtain the hardware settings and the status of the SB Live!
Value card.Typing SBECFG.EXE at the command prompt displays the following hardware
settings:
PCI Hardware Settings: Port, IRQ
●
Sound Blaster Emulation: Port, IRQ, DMA●
MPU-401 Emulation (GM, Roland MT-32/LAPC-1) Emulation: Port●
Adlib Emulation: Port●
The emulation settings appear only if they are enabled.
SBEMIXER.EXE
Use SBEMIXER.EXE to change the volume levels of the MPU-401 instrument set used on the
SB Live! card. You can use SBEMIXER.EXE from the command line—useful for advanced
users who want to set up batch files with particular volume levels—or within the SBEMIXER
screen. The settings for SBEMIXER.EXE are independent of the Creative Mixer settings in
Windows 98 Second Edition.
To set SBEMIXER values in the command line:
At the DOS prompt, type the SBEMIXER command in a single line. Its syntax is:
SBEMIXER [/S:x] [/W:x] [/C:x] [/M:x] [/?]
where square brackets [ ] denote optional parameters, and:
This
Parameter Specifies
To Next Page
Loading...
Need help?
General
