Creative Sound Blaster Tactic3D Rage Wireless - Troubleshooting

Troubleshooting 20
Troubleshooting
What do the various LEDstatuses mean?
The Sound Blaster Tactic3D Rage Wireless headset and USB wireless transmitter is equipped with
various LEDs that indicate the status of the device. Each LED, their possible statuses and
corresponding explanations are listed in the tables below:
Headset LEDs
LED Status Description
Power LED
Flashing Slowly (White) Charging
Stable (White)
Headset is turned on.
If headset is connected to
the charging cable, this
status also indicates that
charging is complete.
Flashing Rapidly (White)
and a soft beeping sound
emits from the headset
Headset has low power.
Please charge your headset.
Off
Headset is off.
If headset is connected to
the charging cable, this
status also indicates that
charging is complete.
Connect LED
Flashing Rapidly
Pairing mode is activated.
The headset is searching for
a compatible wireless
transmitter to be paired to
Stable
Headset is paired to a
corresponding wireless
transmitter
Microphone Mute LED
Stable (Red) Microphone is muted.
Off Microphone mute is off.
USBTransmitter
Connect LED
Flashing Rapidly (white)
Pairing mode is activated.
The transmitter is searching
for a compatible headset
that is in range.
Flashing slowly (white)
USB transmitter is not
paired to any headset.
Stable (white)
USB transmitter is paired to
a headset.