Need help?Do you have a question about the Creative SoundBLASTER AE-9 and is the answer not in the manual?
General| Audio Channels | 7.1 |
|---|---|
| Audio Technology | Sound Blaster |
| Microphone Input | Yes |
| Software | Sound Blaster Command |
| Playback Resolution | 32-bit / 384 kHz |
| Recording Resolution | 24-bit / 192 kHz |
| Op-amp swapping | Yes |
| Sample Rate | Up to 384 kHz |
| Bit Depth | Up to 32-bit |
| Signal-to-Noise Ratio (SNR) | 129dB |
| Connectivity | PCI-e |
| Headphone Amp | Xamp Discrete Bi-Amp |
| Headphone Impedance | 600 Ohm |
| I/O Ports (Rear) | Optical Out |
| I/O Ports (Front - Audio Control Module) | 3.5mm Mic In |
| Surround Sound Technologies | Dolby Digital |
| Inputs | 3.5mm Mic In |
| Outputs | Optical Out |
| Headphone Impedance Range | 16Ω - 600Ω |
| Included Accessories | Audio Control Module (ACM) |
Details the components of the Audio Control Module (ACM).
Details the components of the Sound Card.
Details power supply unit, sound card, and PCIe connectors and important notes.
Steps for preparing the computer and PCIe slot for installation.
Instructions for slotting the Sound Blaster AE-9 into the PCIe slot.
Steps to plug back power and close the computer case.
Diagrams for connecting analog speakers, AV receiver, and Blu-ray/DVD player.
Diagrams for optical out and optical in connections.
Shows microphone and headphone connections to the ACM.
Notes on what not to connect to the ACM Link Port.
Explains the +48V Button, Volume Display, Impedance Selector, Volume Knob, and SBX Button.
Information on downloading and features of the Sound Blaster Command software.
Instructions for product registration and warranty information.
Information on finding technical support and knowledge base.
Explains the WEEE symbol and its meaning for product disposal.
Explains the WEEE symbol and lists hazardous substances in components.
To Next Page