Operational Details
• To accept a call waiting and drop the ongoing call, press and release the Multifunction
button. To accept a call waiting and put on hold to the ongoing call, press the Multifunction
button twice. To accept a call waiting and join to the ongoing call (three-way call), press and
release both the Multifunction and Volume Up “+” buttons.
• To transfer an ongoing call between the WP-250 and your mobile phone, press and hold the
Multifunction button for 2 seconds and release.
• Note that features such as voice dial, last number redial or three-way call are phone
dependent
Clear or reset headset
• Press and hold the Volume Down "-" and Multifunction buttons for more than 6 seconds to
clear the paired Bluetooth devices
• If the headset malfunctions, reset it by supplying USB power, then press the Volume Up "+"
and Multifunction buttons for about 1 second
Automatic shutdown
• Once the headset is powered on, if it is unable to connect to the last paired device or failed
to pair with a new device within 5 minutes, the headset will automatically shut down.
To Next Page
Loading...
