Personalizing Zen 49
To create a customized equalizer setting
1 In the EQ screen, select Custom EQ.
Each slider on the Custom EQ screen represents successively higher frequencies that can
be adjusted.
■ 80 controls bass frequency
■ 250 controls the low mid-range frequency
■ 1k controls the mid-range frequency
■ 4k controls the upper mid-range frequency
■ 13k controls the treble frequency.
2 Select a slider, and move your thumb up and down the Vertical Touch Pad to move the
slider up or down to vary the amount of boost or reduction in the selected frequency range.
3 Firmly tap the Vertical Touch Pad to confirm the setting for the selected slider.
4 Repeat steps 2 and 3 for the remaining sliders.
5 Select the check mark to save and enable the Custom EQ settings.
Setting playback at a constant volume
You can limit the volume range of playback with Smart Volume. When enabled, Smart
Volume sets playback at a constant volume, so you do not have to continually adjust the
volume when you play back different tracks.
1 Press the Menu/Back button.
The main menu appears.
2 Select System Audio Settings Smart Volume: On.
To Next Page
Loading...
