Creator CRT-541 - Stacker Status Response Datasheet

12
Model No. CRT-541
SPECIFICATION
Date 2010/01/10
Ver. 1.0
Card Dispenser
Page
9/16
4.4.5 Stacker Status Response Datasheet
The following table shows stacker status response datasheet.
Status Code Specification
Full of cards in
stacker
‘0’ (0x30) There are enough cards in stacker
Lack of card in
stacker
‘1’(0x31) Card is not sufficient, please
replenish cards
No card in stacker ‘2’(0x32) There is no card in stacker
Note: Data in parentheses is the hex value of matched ASCII.