INSTRUCTION
MANUAL
7
CLEANING AND MAINTENANCE
IMPORTANT: Always turn the appliance off before operations such as cleaning or maintenance. You can do this by
switching the built-in oven off using cooker isolation switch.
IMPORTANT: Do not remove the control knobs to clean the control panel.
WARNING: Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of the glass.
Ceramic glass surface is unbreakable and scratch resistant to a certain degree. However, to avoid any damage,
please do the following:
1. Never pour cold water on hot cookers.
2. Do not stand on a ceramic glass plate.
3. Sudden pressure, for example, the effect of a falling saltshaker, may be critical. So do not place such
object on a place above the hob.
4. After each use, make sure that the base of the cooking pot and surface of cooking zones are clean and
dry.
5. Do not peel vegetables on the hob surfaces. Sand grains falling from the vegetables may scratch the
ceramic glass plate.
6. Do not lay flammable materials such as cardboard or plastic on the cooker. Objects such as tin, zinc, or
aluminum (as well as aluminum foils or empty coffee pots) may melt on hot cooking surfaces and thus
cause damage.
7. Take care not to let sugary foods or fruit juices make contact to the hot cooking zones. The ceramic glass
surface may be stained by these.
TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE RECOMMEND YOU
ALWAYS USE OUR AUTHORISED SERVICE AGENTS AND ORIGINAL SPARE PARTS.
FOR ASSISTANCE CALL CREDA PRODUCT SUPPORT 01759 487836
To Next Page
Loading...
