30
EN
P90-20191122A
4. DIVE TIME (minutes) of the previous dive – TEMPERATURE
(set in C° or F°).
This information appears in rotation on the screen
5. BATTERY STATUS (see BATTERY chapter).
BATTERY
The DIGI 2 provides information about the battery power level through
the following steps in the display of the Battery Replace icon “ ”
AUTOMATIC DISPLAY SWITCH-OFF
The DIGI 2 console switches off automatically after 2 minutes of
inactivity when not under pressure.
IMPORTANT!
After the dive, always depressurize the scuba unit.
1. “ ” off: the instrument has optimum power
to operate normally.
2. “ ” on: the battery is low.
Change the battery.
3. “ ” on with the rest of the display off:
in this condition the battery is not able to ensure the proper
operation of the DIGI 2 console. For this reason the display does
not show any information and all functions are disabled. The
battery must be removed to avoid possible damage.
To Next Page
Loading...
