Cressi DIGI 2 - Changing the Battery

32
EN
P90-20191122A
CHANGING THE BATTERY
Follow these steps to replace the battery:
1. Remove the smart cover.
2. Use a coin of appropriate thickness to unscrew the battery
compartment cover on the back of the DIGI 2 console.
4. Gently insert a pointed object (a small flat-head screwdriver) into
the cavity, and carefully and delicately lever up the used battery.
3. Change the O-ring on the closure cap with a new one, and
grease it lightly, using silicone grease ONLY.