Crest Audio CR-4 - Page 23

23
1.4.2 Scuba Mode Settings
Description: Log Start Depth Setting
To Access: Under Scuba Preview Mode,
press UP Button Or from SETTINGS,
press UP Button / DOWN Button to locate
the cursor at LOG START and then press
MODE Button to select.
One of the log start depth options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection.
Depth options: 1.5M, 2.0M, 2.5M, 3M.
Description: Log Stop Time Setting
To Access: Under Scuba Preview Mode,
press UP Button Or from SETTINGS,
press UP Button / DOWN Button to locate
the cursor at LOG STOP and then press
MODE Button to select.
One of the log stop time options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection.
TIME options: 1MIN, 2MINS, 5MINS, 10
MINS
Description: Scuba PREVIEW MODE &
SCUBA Under Water Mode UI (User
Interface) Setting
To Access: Under Scuba Preview Mode,
press UP Button Or from SETTINGS,
press UP Button / DOWN Button to locate
the cursor at UI and then press MODE
Button to select.
One of the UI options will be blinking at the
bottom. Press UP Button / DOWN Button
to select other options as needed. Press
MODE Button to accept your selection.